- Inquiry
产品参数
其他型号
关于产品
This product can easily repair auto bodies at various stages of damage and can also straighten independent twist damages. The body straightener can be hooked up for sag or kick up, for mash, for mash with sag, for center sway, for sway with mash perimeter frame, for sway and mash unitized body, and for front end sway. They also provide an alternate hook up for front end sway as also for cars in an overall diamond condition.


|
Model |
TW10001 |
Capacity |
10 Ton |
|
Package Size |
3030x400x330 mm |
N.W. |
165 kgs |
|
G.W. |
190 kgs |
QTY/20'CY |
50 PCS |
|
QTY/20'CY |
900 PCS |
• High-quality structural steel
• Available with hand pumps or foot pumps
• Optional overhead boom


If you use and maintain your equipment properly, it will give you many years of service. Follow the
maintenance instructions carefully to keep your equipment in good working condition. Never perform any
maintenance on the equipment while it is under a load.
Cleaning
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean
the equipment. Remove any existing rust, with a penetrating lubricant.
Lubrication
This equipment will not operate safely without proper lubrication. Using the equipment without proper
lubrication will result in poor performance and damage to the equipment. Some parts in this equipment are not
self-lubricating inspect the equipment before use and lubricate when necessary. After cleaning, lubricate the
equipment using light penetrating oil, lubricating spray.
-Use a good lubricant on all moving parts.
-For light duty applications, use lubrication once a month.
-For heavy and constant application, weekly lubrication is recommended.
-NEVER USE SANDPAPER OR ABRASIVE MATERIAL ON THESE SURFACES!
With release valve closed, an upward stroke of the long ram handle draws oil from the reservoir tank into
the plunger cavity. Hydraulic pressure holds the valve closed, which keeps the oil in the plunger cavity. A
downward stroke of the long ram handle releases oil into the cylinder, which forces the ram out. This raises
the hydraulic ram. When the ram reaches maximum extension, oil is bypassed back into the reservoir to
prevent an over extended ram stroke and possible damage to the long ram. Opening the release valve allows
oil to flow back into reservoir. This releases hydraulic pressure on the ram, which results in lowering the
hydraulic ram.
Storing the Crane
1. Lower the Lifting Arm.
2. Place the handle in the upright position.
3. Store in a dry location, recommended indoors.
Note: If the crane is stored outdoors, be sure to lubricate all parts before and after use to ensure the crane
stays in good working condition.
成分-
优质液压油,防止漏油
液压系统采用高质量的油,提供更好的耐腐蚀性和高/低温灵活性,允许单元在40华氏度和105华氏度之间的温度下运行。
自动焊接
该阀采用细钢焊接而成,操作方便,密封性好,性能可靠,具有自动锁气滴料功能。
高密度钢材
由高级钢材制成,并按照严格的质量和耐用性标准建造。
你可能也喜欢
型号
特点
• 安全阀
• 工业密封件
• 机器人焊接
• 激光切割框架
• 可拆卸零件托盘
• 双速泵
• 重型H型框架由高级钢制成,并按照严格的质量和耐用性标准建造
• 在彻底的化学清洗后应用无铅漆面,以确保持久的光洁度并帮助防止生锈
• 油漆是油,油脂和污垢,易于清理
• 高质量的大直径液压钢缸单元导致提高负载所需的较低油压,有助于减少磨损并延长使用寿命
• 活塞闸板经过处理和抛光,以防止打滑
• 活塞-ram采用带支撑环的y型聚氨酯密封圈,防止负载缓慢下降或绕过油漂移
• 液压系统采用高质量的油,提供更好的耐腐蚀性和高/低温灵活性,使设备能够在40华氏度和105华氏度之间的温度下运行
• 超长手柄包括容易抽吸力
• 专为大量商业用途而设计。
• 快速高效的空气泵减少提升时间。
• 硬化合金电镀ram最大的耐久性。
• 带集成过滤器的空气阀,密封液压单元。
• 重型空气马达提供最大功率。
• 防止污染。
• Designed for heavy commercial use.
• Fast efficient air pump reduces lifting time.
• Hardened alloy-plated ram for maximum durability.
• Air valve with integrated filter, seal hydraulic unit.
• Heavy-duty air motor provides maximum power.
• Prevents contamination.
• The hydraulic technology makes lifting simple while a wider frame and internal bypass valve ensure safety.
• Safety bypass system prevents over-loading and ensures safe operation.
• Steel casters for longevity.
• The hydraulic technology makes lifting simple while a wider frame and internal bypass valve ensure safety.
• Safety bypass system prevents over-loading and ensures safe operation.
• Steel casters for longevity.
