- Inquiry
产品参数
其他型号
关于产品
This pneumatic grease injector is an essential professional equipment of the mechanization of oil injection. It is widely applicable to automobile industry, shipbuilding industry, engineering machinery, chemical industry, etc.
The compressed air grease injector features its safety and reliability, low energy consumption, high working pressure, simple operation and high efficiency, really a must have tool for lubrication in workshop, garage, plant or building market.
.
|
Model |
TRH12 |
Min.Qty (Sets) |
100 |
|
Body Treatment |
Power Coating |
Packing |
Brown Carton |
|
Qty/CTN (PC) |
1 |
Meas(mm) |
320x360x840 mm |
|
N.W. / G.W. |
13.5/14.0 kgs |
Qty/20'FT |
289 PCS |
• Material Metal / Coil
• Feature Critical Cleaning / Residue Free
12L HIGH PRESSURE GREASE INJECTOR
Air Hose: 4 m x 6 mm x16 mm high pressure【6000PSI 】；
Barrel size:324x0222mm
with regulator;
with 2 wheels, lid- installed handle;
Compression Ratio:50:1;
Air Pressure (Mpa):0.6 〜0.8;
Grease Delivery(L/Min):0.85;
Outlet Pressure (Mpa):30 〜40;"
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
Cleaning
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.
Do not use motor oil or grease to lubricate the equipment
Rust Prevention:
-Check daily for any signs of rust or corrosion.
Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
Storing the Equipment
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.
成分-
优质液压油，防止漏油
液压系统采用高质量的油，提供更好的耐腐蚀性和高/低温灵活性，允许单元在40华氏度和105华氏度之间的温度下运行。
自动焊接
该阀采用细钢焊接而成，操作方便，密封性好，性能可靠，具有自动锁气滴料功能。
高密度钢材
由高级钢材制成，并按照严格的质量和耐用性标准建造。
你可能也喜欢
型号
15吨专业液压车间压力机
10Ton液压车间压力机
30 ton气动液压瓶千斤顶
35TonPneumatic Hydraulic Bottle Jack
2Ton Hydraulic Trolley Jack
1.5/2Ton Hydraulic Trolley Jack
特点
• 安全阀
• 工业密封件
• 机器人焊接
• 激光切割框架
• 可拆卸零件托盘
• 双速泵
• 重型H型框架由高级钢制成，并按照严格的质量和耐用性标准建造
• 在彻底的化学清洗后应用无铅漆面，以确保持久的光洁度并帮助防止生锈
• 油漆是油，油脂和污垢，易于清理
• 高质量的大直径液压钢缸单元导致提高负载所需的较低油压，有助于减少磨损并延长使用寿命
• 活塞闸板经过处理和抛光，以防止打滑
• 活塞-ram采用带支撑环的y型聚氨酯密封圈，防止负载缓慢下降或绕过油漂移
• 液压系统采用高质量的油，提供更好的耐腐蚀性和高/低温灵活性，使设备能够在40华氏度和105华氏度之间的温度下运行
• 超长手柄包括容易抽吸力
• 专为大量商业用途而设计。
• 快速高效的空气泵减少提升时间。
• 硬化合金电镀ram最大的耐久性。
• 带集成过滤器的空气阀，密封液压单元。
• 重型空气马达提供最大功率。
• 防止污染。
• Designed for heavy commercial use.
• Fast efficient air pump reduces lifting time.
• Hardened alloy-plated ram for maximum durability.
• Air valve with integrated filter, seal hydraulic unit.
• Heavy-duty air motor provides maximum power.
• Prevents contamination.
• The hydraulic technology makes lifting simple while a wider frame and internal bypass valve ensure safety.
• Safety bypass system prevents over-loading and ensures safe operation.
• Steel casters for longevity.
• The hydraulic technology makes lifting simple while a wider frame and internal bypass valve ensure safety.
• Safety bypass system prevents over-loading and ensures safe operation.
• Steel casters for longevity.