Tire Vulcanizing Machine-常熟通润汽车零部件股份有限公司

CN
- EN
- CN

首页

My Pocket

Inquiry

共 X 个清空全部内容

Tire Vulcanizing Machine

1233468643870396416

The machine is of automatic constant temperature,could realize double-size heating, and is equipped with separate switch for control. What’s more, the body mold is equipped with bow-type bracket and transom, making the machine more practical and convenient.Equipped with seven-piece molds, the machine could completely meet the demand of repair any position of tires (such as tire shoulder, tire crown, and tire side), and users only need to select corresponding mould. It is featured by power signal indication, short circuit protection, and optional 120min timing or normally ON, etc.
It is mainly applicable to the repair of various tube tires, small- and medium-size cover tires and vacuum tires.

在线/离线购买

海运/陆运

产品参数

其他型号

关于产品

Product Information

Product Parameters

Model	TRAD004	Input voltage	220 V or 110V
Input power	500 W	Temperature range	145-165 °C
Repair area	100x80 mm	G.W./N.W.	62/42 kgs
Package size	545x415x1475 mm	QTY/20'CY	50 PCS

Features

It is mainly applicable to the repair of various tube tires, small- and medium-size cover tires and vacuum tires.

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

成分-

优质液压油，防止漏油

液压系统采用高质量的油，提供更好的耐腐蚀性和高/低温灵活性，允许单元在40华氏度和105华氏度之间的温度下运行。

自动焊接

该阀采用细钢焊接而成，操作方便，密封性好，性能可靠，具有自动锁气滴料功能。

高密度钢材

由高级钢材制成，并按照严格的质量和耐用性标准建造。

你可能也喜欢

型号

15吨专业液压车间压力机

10Ton液压车间压力机

30 ton气动液压瓶千斤顶

35TonPneumatic Hydraulic Bottle Jack

2Ton Hydraulic Trolley Jack

1.5/2Ton Hydraulic Trolley Jack

查看详细信息

特点

• 安全阀
• 工业密封件
• 机器人焊接
• 激光切割框架
• 可拆卸零件托盘
• 双速泵

• 重型H型框架由高级钢制成，并按照严格的质量和耐用性标准建造
• 在彻底的化学清洗后应用无铅漆面，以确保持久的光洁度并帮助防止生锈
• 油漆是油，油脂和污垢，易于清理
• 高质量的大直径液压钢缸单元导致提高负载所需的较低油压，有助于减少磨损并延长使用寿命
• 活塞闸板经过处理和抛光，以防止打滑
• 活塞-ram采用带支撑环的y型聚氨酯密封圈，防止负载缓慢下降或绕过油漂移
• 液压系统采用高质量的油，提供更好的耐腐蚀性和高/低温灵活性，使设备能够在40华氏度和105华氏度之间的温度下运行
• 超长手柄包括容易抽吸力

• 专为大量商业用途而设计。
• 快速高效的空气泵减少提升时间。
• 硬化合金电镀ram最大的耐久性。
• 带集成过滤器的空气阀，密封液压单元。
• 重型空气马达提供最大功率。
• 防止污染。

• Designed for heavy commercial use.
• Fast efficient air pump reduces lifting time.
• Hardened alloy-plated ram for maximum durability.
• Air valve with integrated filter, seal hydraulic unit.
• Heavy-duty air motor provides maximum power.
• Prevents contamination.

• The hydraulic technology makes lifting simple while a wider frame and internal bypass valve ensure safety.
• Safety bypass system prevents over-loading and ensures safe operation.
• Steel casters for longevity.

京ICP备10002622号

SEO 网站建设：中企动力苏州

营业执照