10Ton Hydraulic Portable Body Repair Kits-常熟通润汽车零部件股份有限公司

CN
- EN
- CN

首页

My Pocket

Inquiry

共 X 个清空全部内容

10Ton Hydraulic Portable Body Repair Kits

10Ton Hydraulic Portable Body Repair Kits

1233468909680218112

• Constructed of high-grade steel and built to exacting standards for quality and durability.
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
• Paint is oil, grease and dirt-resistant for easy cleanup.
• Pump has an automatic overload system to help prevent damage to rams and equipment.

在线/离线购买

海运/陆运

产品参数

其他型号

关于产品

Product Information

Portable Power Kits are designed to be used for pushing, spreading, and pressing of vehicle body panels as well as various component parts and assemblies.

Product Parameters

Model	T710015	Capacity	10 Ton
N.W. / G.W.	36/41.5 kg	Package Size	750x480x265 mm

Features

• Constructed of high-grade steel and built to exacting standards for quality and durability.

• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.

• Paint is oil, grease and dirt-resistant for easy cleanup.

• Pump has an automatic overload system to help prevent damage to rams and equipment.

Common Problems And Solutions

1. When lifting heavy weights, the mandril fails to rise to the maximum route. When the jack reaches a certain height, and the maximum route is not reached, the mandril cannot rise up any more, which indicates that there is a lack of working oil in the jack, and it should be replenished.

2. The mandril wobbles while rising. Generally the oil return valve is not closed tightly; we can tighten oil return valve needle in counterclockwise direction. If it is still unstable, check whether there is any oil leakage around the pressure rod; if the oil leaks, it indicates that the seal ring of the mandril is damaged, and it should be replaced. If there is no oil leakage, confirm again whether the oil return valve and the inlet valve is already locked, and also check sealing gasket conditions in the cylinder end joint of pressure rod; if all the above is normal, then it indicates that the seal ring is damaged, or the fixed screw is loosening, we should replace it or tighten the screw.

3. The mandril fails to rise while no-load. First check the oil amount of the jack, and we should add oil when insufficient. If jack is not short of oil, we can loosen the oil return valve needle of the jack, remove the oil plug of oil filling port, then trample on the jack base by our feet, repeatedly pull up the mandril and press down again by our hands for several times, in order to exhaust air; after the above actions are completed, tighten the oil plug of oil filling port and oil return valve tightly, and then try again the no-load mandril; if the mandril still cannot rise, lay jack flat, remove the oil return valve, check whether the valve and seat contact well; if there is dirt, it should be removed; if there is pit, slot and uneven, it should be replaced. Finally check whether the oil inlet valve is well sealed and the sealing ring of mandril is damaged or falls off. If any, replace it in time.

4. Oil leakage, can be seen by visual observation. The oil leakage area of the jack is usually in the base and the cylinder joint, around the mandril, in the lock thread of the oil return valve, in the fixed oil plug of the oil filling port, around pressure rod etc. The cause of oil leakage is usually the damage of sealing gasket, it must be replaced in time.

成分-

优质液压油，防止漏油

液压系统采用高质量的油，提供更好的耐腐蚀性和高/低温灵活性，允许单元在40华氏度和105华氏度之间的温度下运行。

自动焊接

该阀采用细钢焊接而成，操作方便，密封性好，性能可靠，具有自动锁气滴料功能。

高密度钢材

由高级钢材制成，并按照严格的质量和耐用性标准建造。

你可能也喜欢

型号

15吨专业液压车间压力机

10Ton液压车间压力机

30 ton气动液压瓶千斤顶

35TonPneumatic Hydraulic Bottle Jack

2Ton Hydraulic Trolley Jack

1.5/2Ton Hydraulic Trolley Jack

查看详细信息

特点

• 安全阀
• 工业密封件
• 机器人焊接
• 激光切割框架
• 可拆卸零件托盘
• 双速泵

• 重型H型框架由高级钢制成，并按照严格的质量和耐用性标准建造
• 在彻底的化学清洗后应用无铅漆面，以确保持久的光洁度并帮助防止生锈
• 油漆是油，油脂和污垢，易于清理
• 高质量的大直径液压钢缸单元导致提高负载所需的较低油压，有助于减少磨损并延长使用寿命
• 活塞闸板经过处理和抛光，以防止打滑
• 活塞-ram采用带支撑环的y型聚氨酯密封圈，防止负载缓慢下降或绕过油漂移
• 液压系统采用高质量的油，提供更好的耐腐蚀性和高/低温灵活性，使设备能够在40华氏度和105华氏度之间的温度下运行
• 超长手柄包括容易抽吸力

• 专为大量商业用途而设计。
• 快速高效的空气泵减少提升时间。
• 硬化合金电镀ram最大的耐久性。
• 带集成过滤器的空气阀，密封液压单元。
• 重型空气马达提供最大功率。
• 防止污染。

• Designed for heavy commercial use.
• Fast efficient air pump reduces lifting time.
• Hardened alloy-plated ram for maximum durability.
• Air valve with integrated filter, seal hydraulic unit.
• Heavy-duty air motor provides maximum power.
• Prevents contamination.

• The hydraulic technology makes lifting simple while a wider frame and internal bypass valve ensure safety.
• Safety bypass system prevents over-loading and ensures safe operation.
• Steel casters for longevity.

京ICP备10002622号

SEO 网站建设：中企动力苏州

营业执照