Current Location: Home >> Products >> Tire Vulcanizing Machine

Tire Vulcanizing Machine

  • Model:TRAD001Q
  • Capacity:

•   The machine is of automatic constant temperature. It is featured by power signal indication, short circuit protection, and optional fixed-time work or normally ON, etc.

•   It is mainly applicable to the repair of various tube tires, small-size cover tyres and vacuum tires.

Product Information | Product Parameters | Features | Common Problems And Solutions
Product Parameters

Model

TRAD001Q


Input voltage

220 V or 110V

Input power

500 W


Repair area

60x60 mm

Sinqle G.W/N.W

8.95/7.9 kgs


Sinqle Package Size 

330x195x510 mm

G.W/N.W.

37.5/35.8 kgs


Packgae size

685x415x535 mm

QTY/CTN

4 PCS


QTY/20'CY

160 PCS


Features

•   The machine is of automatic constant temperature. It is featured by power signal indication, short circuit protection, and optional fixed-time work or normally ON, etc.

•   It is mainly applicable to the repair of various tube tires, small-size cover tyres and vacuum tires.


Common Problems And Solutions

If you use and maintain your equipment properly, it will give you many years of service. Follow the

maintenance instructions carefully to keep your equipment in good working condition. Never perform any

maintenance on the equipment while it is under a load.


Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean

the equipment. Remove any existing rust, with a penetrating lubricant.

Lubrication

This equipment will not operate safely without proper lubrication. Using the equipment without proper

lubrication will result in poor performance and damage to the equipment. Some parts in this equipment are not

self-lubricating inspect the equipment before use and lubricate when necessary. After cleaning, lubricate the

equipment using light penetrating oil, lubricating spray.

-Use a good lubricant on all moving parts.

-For light duty applications, use lubrication once a month.

-For heavy and constant application, weekly lubrication is recommended.

-NEVER USE SANDPAPER OR ABRASIVE MATERIAL ON THESE SURFACES!


With release valve closed, an upward stroke of the long ram handle draws oil from the reservoir tank into

the plunger cavity. Hydraulic pressure holds the valve closed, which keeps the oil in the plunger cavity. A

downward stroke of the long ram handle releases oil into the cylinder, which forces the ram out. This raises

the hydraulic ram. When the ram reaches maximum extension, oil is bypassed back into the reservoir to

prevent an over extended ram stroke and possible damage to the long ram. Opening the release valve allows

oil to flow back into reservoir. This releases hydraulic pressure on the ram, which results in lowering the

hydraulic ram.


Storing the Crane

1. Lower the Lifting Arm.

2. Place the handle in the upright position.

3. Store in a dry location, recommended indoors.

Note: If the crane is stored outdoors, be sure to lubricate all parts before and after use to ensure the crane

stays in good working condition.

Our Phone

Hotline

400-066-4786

Feedback
Contact
Telephone
Fill in your message
Tongrun WeChat

ewm2.jpg

Follow The Dynamic

Company Address

江苏省常熟市经济技术开发区

新龙腾工业园