Current Location: Home >> Products >> Engine Crane

1Ton Engine Crane

  • Model:TR31002B
  • Capacity:1 Ton

•   The wheel construction for more stability and easy rolling.

•   Adjustable lifting arm.

•   Heavy gauge tubular steel construction.

•   Folds in half for easy storage.

Product Information | Product Parameters | Features | Common Problems And Solutions
Product Information

This product is specially designed to raise, lower and transport engines, differentials, transmissions, and other heavy loads with minimal effort. This product is tested for reliability and safety.



1514277877807906.jpg

engine-hoist-use.jpg

Product Parameters

Model

TR31002B


Capacity

1 Ton

Min.Height

250 mm


Max. Height

2500 mm

MOQ

3 PCS


Package Size

1660x540x1240 mm (3 PCS)

N.W. / G.W.

116/124 kgs


QTY/20'CY

78 PCS

Features

•   The wheel construction for more stability and easy rolling.

•   Adjustable lifting arm.

•   Heavy gauge tubular steel construction.

•   Folds in half for easy storage.


Common Problems And Solutions

If you use and maintain your equipment properly, it will give you many years of service. Follow the

maintenance instructions carefully to keep your equipment in good working condition. Never perform any

maintenance on the equipment while it is under a load.


Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean

the equipment. Remove any existing rust, with a penetrating lubricant.

Lubrication

This equipment will not operate safely without proper lubrication. Using the equipment without proper

lubrication will result in poor performance and damage to the equipment. Some parts in this equipment are not

self-lubricating inspect the equipment before use and lubricate when necessary. After cleaning, lubricate the

equipment using light penetrating oil, lubricating spray.

Use a good lubricant on all moving parts.

For light duty applications, use lubrication once a month.

For heavy and constant application, weekly lubrication is recommended.

NEVER USE SANDPAPER OR ABRASIVE MATERIAL ON THESE SURFACES!


With release valve closed, an upward stroke of the long ram handle draws oil from the reservoir tank into

the plunger cavity. Hydraulic pressure holds the valve closed, which keeps the oil in the plunger cavity. A

downward stroke of the long ram handle releases oil into the cylinder, which forces the ram out. This raises

the hydraulic ram. When the ram reaches maximum extension, oil is bypassed back into the reservoir to

prevent an over extended ram stroke and possible damage to the long ram. Opening the release valve allows

oil to flow back into reservoir. This releases hydraulic pressure on the ram, which results in lowering the

hydraulic ram.


Storing the Crane

1. Lower the Lifting Arm.

2. Place the handle in the upright position.

3. Store in a dry location, recommended indoors.

Note: If the crane is stored outdoors, be sure to lubricate all parts before and after use to ensure the crane

stays in good working condition.

Our Phone

Hotline

400-066-4786

Feedback
Contact
Telephone
Fill in your message
Tongrun WeChat

ewm2.jpg

Follow The Dynamic

Company Address

江苏省常熟市经济技术开发区

新龙腾工业园