Current Location: Home >> Products >> AUTO TOOLS + STORAGES

Trolley Tool Box TRJF-A308ABCC

  • Model:TRJF-A308ABCC
  • Capacity:/

PP and Steel material,super durability.

With large space and good for different kinds of tools packing.

Product Information | Product Parameters | Features | Common Problems And Solutions
Product Information

Mobil Installation tool box made up of a regular tool box with compartments on top lid and a tray inside and five drawers with ball bearing sliding rail.


Product Parameters



Product Size

 410x265x550 mm


11.2 kgs


12.1 kgs


PE bag per unit+Carton

Package Size 



409 PCS


100 PCS


PP and Steel material,super durability.

With large space and good for different kinds of tools packing.

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.


If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Our Phone



Fill in your message
Tongrun WeChat


Follow The Dynamic

Company Address