Current Location: Home >> Products >> Jack Stands

12Ton Jack Stands

  • Model:T12002
  • Capacity:12 Ton

•  Ratchet type axle stand with cast iron support post and tough welded steel plate base.

•  Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked.

Product Information | Product Parameters | Features | Common Problems And Solutions
Product Information

         Jack Stands are designed to support rated capacity, partial vehicle loads 

consisting of one end of a vehicle. Use both stands for each operation.


T42002-USE-01.jpg

Product Parameters

Model

T412002


Capacity

12 Ton

Min. Height

465 mm


Max Height

715 mm

Product Size

/


Package Size

320x290x570 mm

N.W./G.W.

26.3/27.1 kg


QTY/20'CY

620 Pairs

Features

•  Ratchet type axle stand with cast iron support post and tough welded steel plate base.

•  Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked.



Common Problems And Solutions

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

public-jack-stand.jpg

Our Phone

Hotline

400-066-4786

Feedback
Contact
Telephone
Fill in your message
Tongrun WeChat

ewm2.jpg

Follow The Dynamic

Company Address

江苏省常熟市经济技术开发区

新龙腾工业园