Current Location: Home >> Products >> Tool Cabinet with Tools

Tool set in metal box TRGW00088

  • Model:TRGW00088
  • Capacity:/

88 PCS Mechanical Tools Set

Contents
♦ 14 PCS 1/2" Dr. Socket: 10,11,12,13,14,15,16,17,18,19,20,21,22,24mm
♦ 2 PCS Ratchet Handle 72 Teeth with Quick Release:1/4", 1/2"
♦ 2 PCS Extension Bar:1/2”x5", 1/2"x10" with 3-Way Adaptor
♦ 11 PCS 1/4" Dr. Socket: 4,4.5, 5,5.5, 6,7,8, 9,10,11,12mm
♦ 10 PCS Bits: SL:3,4, 5,6mm / PH:0,1,2, 3mm / PZ:1, 2mm
♦ 4 PCS Screwdriver: SL6x100mm / PH1x75, PH5x75, PH6x100mm
♦ 12PCS Spanner: 6,7,8, 9,10,11,12,13,14,15,16,17mm
♦ 9 PCS Hex Key: 1.5,2, 2.5, 3,4,5,6, 8,10mm
♦ 1 PC 10" Water Pump Plier
♦ 1 PC Knife: 18mm
♦ 2 PCS Universal Joint:1/4", 1/2”
♦ 1 PC 1/4" Spinner Handle
♦ 2 PCS 1/2” Dr. Plug Socket: 16,21mm
♦ 1 PC 1/4" Bits Adaptor
♦ 1 PC Extension Bar: 1/4”x3"
♦ 1 PC 160mm Locking Plier
♦ 1 PC 1/4" Spinner Handle
♦ 1 PC 160mm Diagonal Cutting Plier
♦ 1 PC 160mm Long Nose Plier
♦ 10 PCS Blades: 18mm Wide
♦ 1 PC Measure Tape: 5x19mm

Product Information | Product Parameters | Features | Common Problems And Solutions
Product Information

The tool chests or cabinets are a great way to store and organize your tools for your shop or garage. They are manufactured using the highest grade of raw materials available. These steel tool storage systems are secured with a high-security tubular locking mechanism. Drawers are equipped with ball-bearing slides, removable EVA slip-proof liners and full-length aluminum drawer pulls for smooth operation.

new.jpg


public.jpg

Product Parameters

 

Model

TRGW00088


Overall Size

88 pcs mechanical tools set

N.W.

 

10.25 kgs


G.W.

 

10.72 kgs

 

Package Size

538x232x240 mm 


QTY/20'CY

990 PCS











 

 

Features

88 PCS Mechanical Tools Set

Contents
♦ 14 PCS 1/2" Dr. Socket: 10,11,12,13,14,15,16,17,18,19,20,21,22,24mm
♦ 2 PCS Ratchet Handle 72 Teeth with Quick Release:1/4", 1/2"
♦ 2 PCS Extension Bar:1/2”x5", 1/2"x10" with 3-Way Adaptor
♦ 11 PCS 1/4" Dr. Socket: 4,4.5, 5,5.5, 6,7,8, 9,10,11,12mm
♦ 10 PCS Bits: SL:3,4, 5,6mm / PH:0,1,2, 3mm / PZ:1, 2mm
♦ 4 PCS Screwdriver: SL6x100mm / PH1x75, PH5x75, PH6x100mm
♦ 12PCS Spanner: 6,7,8, 9,10,11,12,13,14,15,16,17mm
♦ 9 PCS Hex Key: 1.5,2, 2.5, 3,4,5,6, 8,10mm
♦ 1 PC 10" Water Pump Plier
♦ 1 PC Knife: 18mm
♦ 2 PCS Universal Joint:1/4", 1/2”
♦ 1 PC 1/4" Spinner Handle
♦ 2 PCS 1/2” Dr. Plug Socket: 16,21mm
♦ 1 PC 1/4" Bits Adaptor
♦ 1 PC Extension Bar: 1/4”x3"
♦ 1 PC 160mm Locking Plier
♦ 1 PC 1/4" Spinner Handle
♦ 1 PC 160mm Diagonal Cutting Plier
♦ 1 PC 160mm Long Nose Plier
♦ 10 PCS Blades: 18mm Wide
♦ 1 PC Measure Tape: 5x19mm


 





Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.


Our Phone

Hotline

400-066-4786

Feedback
Contact
Telephone
Fill in your message
Tongrun WeChat

ewm2.jpg

Follow The Dynamic

Company Address

江苏省常熟市经济技术开发区

新龙腾工业园