Current Location: Home >> Products >> Grease Gun

Manually Grease Gun

  • Model:TRSX220
  • Capacity:

• "Shift" switch to increase volume or pressure.

• Bulid-up with smart air vent value for easy to release air pocket.

• Aluminum housing withstand tough environmrnts.

Product Information | Product Parameters | Features | Common Problems And Solutions
Product Information

Smart green gun,itsideal for extending gun handle to allow one-hand operation grease gun to able worked in two-hand operation.By this way,the user could more options to do its work in properway.One-hand operation gun is convenience for narrow space.Tow-hand operation grease is for user easy to get a hiah pressure performance.This smart "FUCTION" gun offers a comfortable handle that lets you use one or two hands for greasing.

public.jpg

Product Parameters

Model

TRSX220


Working Pressure Max

2900 psi

Burst Pressure

4000 psi


De livers Mins

0.5/40(oz/Strokes)

Loading Way(c.c.)

120


Capacity(c.c.)

120

N.W./G.W.

16.17/19.67 kgs


Package Size

5435 mm

QTY/CTN

30 PCS


QTY/20'CY

15000 PCS

Features

 • "Shift" switch to increase volume or pressure.

• Bulid-up with smart air vent value for easy to release air pocket.

• Aluminum housing withstand tough environmrnts.

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Our Phone

Hotline

400-066-4786

Feedback
Contact
Telephone
Fill in your message
Tongrun WeChat

ewm2.jpg

Follow The Dynamic

Company Address

江苏省常熟市经济技术开发区

新龙腾工业园