Current Location: Home >> Products >> PROFESSIONAL AUTO EQUIPMENTS

Engine Tools

  • Model:TRHS-8781
  • Capacity:/

The items you ordered will be shipped out in 1-2 business day via Fedex whenrour payment is clear. The amva time is about7 business days to United States usually3 different slide hammers 1.6 kg, 160 mm length 2.7 kg, 460 mm length 5.1 kg, 600 mm

2 pulling claws with fork opening 13. x 18mm, 105 mm length 12.7 19mm, 130 mmlength-5 slotted 6-pf 1/2 sockets, 100 mm length sizes 25-27-28-29-30 mminjector extractor sleeve desian. with shells outer diameter 35 mm intemal diamete29 mm M17 x 1.0 spindle

pulling adapter with extemal thread M27 x 1. 0(3pcs)and M25 x 1.0-puling adapter withintemal thread M7 x 1.0(3pcs)-sliding hammer adapter for inner, outer and claw extractor

Product Information | Product Parameters | Features | Common Problems And Solutions
Product Information
Diesel Injector Extractor Master Kit

public.jpg

Product Parameters


N.W.

17 kgs


G.W.

18 kgs

Package Size

330x310x235 mm


QTY/CTN

5 PCS

MOQ

10 PCS






Features

The items you ordered will be shipped out in 1-2 business day via Fedex whenrour payment is clear. The amva time is about7 business days to United States usually3 different slide hammers 1.6 kg, 160 mm length 2.7 kg, 460 mm length 5.1 kg, 600 mm

2 pulling claws with fork opening 13. x 18mm, 105 mm length 12.7 19mm, 130 mmlength-5 slotted 6-pf 1/2 sockets, 100 mm length sizes 25-27-28-29-30 mminjector extractor sleeve desian. with shells outer diameter 35 mm intemal diamete29 mm M17 x 1.0 spindle

pulling adapter with extemal thread M27 x 1. 0(3pcs)and M25 x 1.0-puling adapter withintemal thread M7 x 1.0(3pcs)-sliding hammer adapter for inner, outer and claw extractor

TRHS-8781.jpg

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.



Our Phone

Hotline

400-066-4786

Feedback
Contact
Telephone
Fill in your message
Tongrun WeChat

ewm2.jpg

Follow The Dynamic

Company Address

江苏省常熟市经济技术开发区

新龙腾工业园