Current Location: Home >> Products >> 4-Post Hydraulic Lift

4 Ton Four Post Lift

  • Model:QJY4040-ZJYK
  • Capacity:4 Ton

• Ladder lock system

• Commercial grade synchronizing safety latch system offers a unique two position locking mechanism 

• Air locking system

• Adjustable runway widths

• Large heavy-duty 3" cylinder

• Aircraft quality lifting cables

• Matted powder coat finish

• Aluminum alloy front turn plates

• Built in rear slip plates

• Optional Rolling Bridge Jack available

Product Information | Product Parameters | Features | Common Problems And Solutions
Product Information

This lift system's runways accommodate wide or narrow vehicles, have rail kits for adding optional accessories and are powered by a single hydraulic cylinder mounted underneath the runway. Item too large for lift gate. Requires forklift on site for unloading.

public-详情图片.jpg



Product Parameters

Model

QJY4040-ZJYK


Capacity

4 Ton

Min ground clearance

184 mm


Max ground clearance

1944 mm

Rise time

60 sec.


 Drop time

 45 sec.

Drop time Power of moter

2.2 kw


Power of supply

380V / 220V

Tabel  length

4650 mm


Tabel  width

480 mm

N.W./G.W.

1150/1190 kgs


1#Package size

4650x560x878 mm

2#Package size

900x280x320 mm


3#Package size

990x550x330 mm

QTY/20.CY

8 PCS


 

 


Features

• Ladder lock system

• Commercial grade synchronizing safety latch system offers a unique two position locking mechanism 

• Air locking system

• Adjustable runway widths

• Large heavy-duty 3" cylinder

• Aircraft quality lifting cables

• Matted powder coat finish

• Aluminum alloy front turn plates

• Built in rear slip plates

• Optional Rolling Bridge Jack available

QJY4040-ZJYK.jpg


Common Problems And Solutions

Sequence of Lockout Procedure

1) Notify all affected employees that a lockout is being performed for servicing or maintenance and that the lift must be shut down and locked out to perform the servicing or maintenance

2) Unload the subject lift (remove vehicle). Shut it down and assure the disconnect switch is "OFF" if one is provided on the lift.

3) The authorized lockout person operates the main energy isolation device removing power to the lift being taken out of service. Stored or residual energy (such as capacitors, springs, elevated machine members, hydraulic systems, air, or etc.) must be dissipated or restrained by methods such as grounding, repositioning, blocking, bleeding down, etc.

If this is a lockable device, the authorized lockout person places the assigned padlock on the device to prevent its unintentional reactivation. An appropriate tag is applied stating the person's name, at least 3" x 6" in size, an easily noticeably color, and states not to operate device or remove tag. If this device is a non-lockable circuit breaker or fuse, replace circuit with a "dummy" device and tag it appropriately as mentioned above.

4) Ensure that the equipment is disconnected from the energy sources' by first checking that no personnel are exposed, then verify the isolation of the equipment by operating the push button or other normal operating controls' or by testing to make certain the equipment will not operate. . Be sure to return any switches to the "OFF" position.

5) The equipment is now locked out and ready for the required maintenance or service.


Restoring Equipment to Service

1) Check the lift and the immediate area around the lift to ensure that nonessential items have been removed (clear all tools, vehicles and personnel) and that the completion of all lift components are operationally intact.

2) The authorized person can now remove the lock (or dummy circuit breaker or fuse) and tag. Activate the energy isolating device so that the lift may again be placed into operation.

Our Phone

Hotline

400-066-4786

Feedback
Contact
Telephone
Fill in your message
Tongrun WeChat

ewm2.jpg

Follow The Dynamic

Company Address

江苏省常熟市经济技术开发区

新龙腾工业园