Current Location: Home >> Products >> AUTO EQUIPMENTS + ACCESSORIES

Wheel Step

  • Model:TTC03
  • Capacity:/

. Quick access to a vehicle roof

. Folds for storage under a seat

. Adjustable design fits most car and light truck tires

. Non-slip surface for added grip

. Steel construction


Product Information | Product Parameters | Features | Common Problems And Solutions
Product Information

Tire stepping for professional use automotive tools, there are two purposes: firstly, to increase the height of the installation of the roof support equipment to the roof, the second is for large SUV engine compartment operation easy reach inside. More convenient when working on are taller vehicle. Can be installed on the front and rear tires.

public.jpg

Product Parameters

Package Size

790x430x130 mm


N.W.

6 kgs

G.W.

7 kgs


QTY/CTN

1 P

QTY/20'CY

600 PCS


MOQ

100 PCS



Features

. Quick access to a vehicle roof

. Folds for storage under a seat

. Adjustable design fits most car and light truck tires

. Non-slip surface for added grip

. Steel construction



Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.


Our Phone

Hotline

400-066-4786

Feedback
Contact
Telephone
Fill in your message
Tongrun WeChat

ewm2.jpg

Follow The Dynamic

Company Address

江苏省常熟市经济技术开发区

新龙腾工业园