Current Location: Home >> Products >> AUTO EQUIPMENTS + ACCESSORIES

0.5 Ton Electric Chain Host

  • Model:TRC9E0051B
  • Capacity:0.5 T ON

. Ideal for lifting heavy materials with inimum power.

. Triple spur gear.

. Safety hooks included.

. Safety brake prevents slipping.

Product Information | Product Parameters | Features | Common Problems And Solutions
Product Information

Geared single running manual trolley is a simple and useful structure, easy for carry and operate. This type is driven by chain, it can be used together with Chain hoist or other lifting products to match the composition of lifting and transporting. It can freely run in a certain radius of curvature of the I-beam track along the upper and lower wings, installed in the straight or the curve of the monorail overhead transport line or manual single-beam bridge. It is widely applicable to factories, mines, docks, shipyards, warehouses and computer room and other places to install machines, lifting goods, especially for locations with no power equipment installation.


Product Parameters




0.5 ton

Lifting Height

3 m

Lifting Speed

6.8 m/min


0.8 kw

Rotation Speed

1440 r/min




220/440 v


50/60 Hz/s


58-127 mm


30 kgs


35 kgs

Package Size

400x380x350 mm


200 PCS


. Ideal for lifting heavy materials with inimum power.

. Triple spur gear.

. Safety hooks included.

. Safety brake prevents slipping.

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.


If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Our Phone



Fill in your message
Tongrun WeChat


Follow The Dynamic

Company Address