Current Location: Home >> Products >> Other

10TonFrame Straightener

  • Model:
  • Capacity:

• High-quality structural steel

• Available with hand pumps or foot pumps

• Optional overhead boom 


Product Information | Product Parameters | Features | Common Problems And Solutions
Product Information

This product can easily repair auto bodies at various stages of damage and can also straighten independent twist damages. The body straightener can be hooked up for sag or kick up, for mash, for mash with sag, for center sway, for sway with mash perimeter frame, for sway and mash unitized body, and for front end sway. They also provide an alternate hook up for front end sway as also for cars in an overall diamond condition.



1514277877807906.jpg

engine-support-use-2.jpg

Product Parameters

Model

TW10001


Capacity

10 Ton

Package Size

3030x400x330 mm


N.W.

165 kgs

G.W.

190 kgs


QTY/20'CY

50 PCS

QTY/20'CY

900 PCS




Features

• High-quality structural steel

• Available with hand pumps or foot pumps

• Optional overhead boom 



Common Problems And Solutions

If you use and maintain your equipment properly, it will give you many years of service. Follow the

maintenance instructions carefully to keep your equipment in good working condition. Never perform any

maintenance on the equipment while it is under a load.


Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean

the equipment. Remove any existing rust, with a penetrating lubricant.

Lubrication

This equipment will not operate safely without proper lubrication. Using the equipment without proper

lubrication will result in poor performance and damage to the equipment. Some parts in this equipment are not

self-lubricating inspect the equipment before use and lubricate when necessary. After cleaning, lubricate the

equipment using light penetrating oil, lubricating spray.

-Use a good lubricant on all moving parts.

-For light duty applications, use lubrication once a month.

-For heavy and constant application, weekly lubrication is recommended.

-NEVER USE SANDPAPER OR ABRASIVE MATERIAL ON THESE SURFACES!


With release valve closed, an upward stroke of the long ram handle draws oil from the reservoir tank into

the plunger cavity. Hydraulic pressure holds the valve closed, which keeps the oil in the plunger cavity. A

downward stroke of the long ram handle releases oil into the cylinder, which forces the ram out. This raises

the hydraulic ram. When the ram reaches maximum extension, oil is bypassed back into the reservoir to

prevent an over extended ram stroke and possible damage to the long ram. Opening the release valve allows

oil to flow back into reservoir. This releases hydraulic pressure on the ram, which results in lowering the

hydraulic ram.


Storing the Crane

1. Lower the Lifting Arm.

2. Place the handle in the upright position.

3. Store in a dry location, recommended indoors.

Note: If the crane is stored outdoors, be sure to lubricate all parts before and after use to ensure the crane

stays in good working condition.

Our Phone

Hotline

400-066-4786

Feedback
Contact
Telephone
Fill in your message
Tongrun WeChat

ewm2.jpg

Follow The Dynamic

Company Address

江苏省常熟市经济技术开发区

新龙腾工业园